The system is classified as an intelligent 10/100/1000M Ethernet optical transceiver, which can convert 10Base-T/100Base-TX/1000Base-T twisted pair electrical signal to 1000Base-FX optical signal. It can extend the transmission distance of the network from 100 meters copper wire limit to 100 kilometers. Can meet the needs of long distance, high speed, high broadband fast Ethernet workgroup users. Product performance is stable and reliable, in line with Ethernet standards, and with lightning protection measures. The products are suitable for telecommunication and intelligent broadband data network requiring high reliability data transmission or the establishment of IP data transmission private network, intelligent security monitoring field. It is the ideal equipment for broadband LAN, Internet, intelligent security and FTTH.
Product features:
★ Comply with IEEE802.3 10Base-T,IEEE802.3 U100Base-TX, IEEE802.3x, and IEEE802.3z 1000Base-T standards.
★ Meet the carrier-class operating standards, the average trouble-free time is more than 50,000 hours, twisted pair electrical port self-fit
The 10Mbps/100Mbps/1000Mbps mode facilitates network upgrade.
★ Supports full-duplex and half-duplex transmission modes and can negotiate automatically.
★ Electrical port can adapt parallel line/cross line connection mode.
★ Built-in efficient switching core, cache capacity 1MBITs, MAC address capacity 1K, broadcast storm suppression, traffic control, CRC error check, address filtering, network segmentation functions.
★ Provides one 1000MPS or 10/100/1000MPS adaptive twisted pair interface and one 1.25Gbps optical port (SC/PC,FC/PC,ST/PC optional).
★ Supports transmission of ultra-long data packets with a maximum length of 15520 bytes.
★ Supports QoS to ensure VOIP data packet transmission.
★ Supports STP spanning trees to form a redundant network.
Low power consumption, low heating, can work stably for a long time.
★ It provides multiple optical fiber transmission modes, such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode.
★ Power supply: Built-in power supply and external power supply are optional.
★ An external power transceiver can be used in a 2U-14 slot rack. A card transceiver can be used in a 2U-16 slot rack.
Product parameters:
|
parameter |
Gauge lattice |
|
Transmission rate |
1000 Mbps 10/100/1000 Mbps |
|
Optical wavelength |
850nm/1310nm/1550nm |
|
Ethernet interface |
1个RJ45Electrical port |
|
Optical fiber interface |
multimode-SC/ST/FC (Optical fiber size 50,62.5/125 µm) Single mode-SC/ST/FC Optical fiber port (Optical fiber size 9/125 µm) Single fiber single mode-SC/ST /FC Optical fiber port (Optical fiber size 9/125 µm) |
|
Twisted pair standard |
Connect STP/UTP five-type twisted pair cables |
|
Delay time |
9.6µS |
|
Bit error rate |
<1/1000000000 |
|
Transmission distance |
Double fiber multi-mode:2Km Double fiber single mode:25/40/60/80/100/120Km Single fiber single mode:25/40/60/80Km |
|
Optical power |
0～-40 |
|
Receiving sensitivity |
≤-37 |
|
Flow control |
Full duplex: flow control, half duplex: back pressure mode |
|
LEDIndicator light |
POWER(电源),FXLINK/ACT(光纤连通/动作) FDX(FX全双工方式),FX100/1000(光纤100M/1000M传输速率) TP LINK/ACT(网口双绞线连通动作) TP100/1000 (网口双绞线100M/1000M传输速率) |
|
Power supply standard |
输入:AC 220V; 输出:DC 5V 1A |
|
Operating temperature |
-20-70℃ |
|
Working humidity |
5%-90% |
|
Storage temperature |
-40-85℃ |
|
Storage humidity |
5%-90% No condensation |
|
Electromagnetic interference standard |
FCC Part 15 Class A,CE |
|
size |
26mm(H)×70mm(W) ×95mm(D) high × wide × Beam (external) 30mm(H)×110mm(W) ×140mm(D) high × wide × Beam (built-in) |
