The P2016M-2GF
series full gigabit two-layer network managed PoE switch has 16 gigabit network
ports and 2 gigabit uplink SFP optical port slots, with 1-16 ports supporting
IEEE 802.3af/at standard PoE power supply, and a single port PoE power of up to
30W. The P2016M-2GF business ports all support 4KV electrostatic lightning
protection. As a PoE power supply device, it can automatically detect and
identify power receiving devices that meet standards and provide power to them
through network cables. Power can be provided to POE terminal devices such as
wireless APs, network cameras, network telephones, and building visual access
control intercoms through network cables, meeting the demand for high-density
PoE power supply in network environments. It is suitable for hotels, campuses,
parks, supermarkets, banks, scenic spots, factory dormitories, and SMB small
and medium-sized enterprises to form an economical and efficient network.
P2016M-2GF has
L2+network management function, supports IPV4 Static routing forwarding, supports
complete security protection mechanism, perfect ACL/QoS policy and rich VLAN
functions, and is easy to manage and maintain. Supporting multiple network
redundancy protocols STP/RSTP/MSTP (<50ms) and ERPS (<20ms) ring network
protocols, improving link backup and network reliability. In the event of a
one-way network failure, communication can be quickly restored, ensuring
uninterrupted communication for important transmissions. According to practical
application needs, PoE power supply management, port flow control, VLAN
partitioning, QoS, LACP, IGMP, and DHCP are configured through network
management methods such as Web, CLI, SNMP, and Telnet.
Software
Features
Single port PoE
power up to 30W, af/at adaptive, widely compatible with various network terminals,
supporting PoE network management, remote POE port restart, real-time power
status viewing;
Dual optical port
uplink port, fiber optic long-distance transmission, suitable for cascading and
expanding various ring/chain networks, making networking simpler;
Full gigabit
high-speed transmission, stable and guaranteed high bandwidth transmission,
supporting speed and flow control per port, achieving 10M/250 meters
long-distance transmission, easily solving long-distance communication and
power supply problems, and meeting different user needs;
Enterprise level
high bandwidth switching chip, high backplane, large cache, reducing network
congestion;
Support automatic
learning and updating of MAC addresses, and support automatic port flipping
(Auto MDI/MDI-X) function;
The business port
supports 4KV surge (lightning) protection, PoE short circuit and overload
protection, making it safer and more reliable to use;
Precision steel
forged metal shell, shielded from interference, strong heat dissipation, sturdy,
rust resistant, and more durable;
Strong business
capabilities
It supports 128 IPV4
Static routing and ARP protocol, with a maximum of 1024 entries.
Flexible port
bandwidth and traffic configuration, optical port DDMI digital diagnosis
function, easy to achieve fine network management.
Support IEEE 802.1Q
VLAN, protocol VLAN, and QinQ VLAN, allowing users to flexibly partition VLANs
according to their needs.
Support QoS, support
three priority modes based on port, 802.1P, and DSCP, as well as four queue
scheduling algorithms: Equ, SP, WRR, and SP+WRR.
Support ACL, filter
data packets by configuring matching rules, processing operations, and time
permissions, and provide flexible security access control policies.
Support IGMP V1/V2
multicast protocol, support IGMP SnoopingV1/V2/V3, and meet the needs of multi
terminal high-definition video monitoring and video conference access.
Support STP/RSTP/MSTP
production tree protocol and ERPS fast ring network protocol, eliminate layer 2
loops, and achieve link backup.
Support static
aggregation and dynamic aggregation (LACP), effectively increase link
bandwidth, achieve load balancing, link backup, and improve link reliability.
Complete security
features
Support for WEB
interface user authentication
Support CPU protection to prevent Big data
stream from attacking the switch itself
Support 802.1x
authentication, remote RADIUS, TACACS+ authentication
The hardware supports
IP ACL, MAC ACL, ACL port filtering functions, MAC address binding, and port
based IP+MAC+ Vlan+ port multiple binding functions.
Support DHCP Snoopingv1/v2/v3 function, port
isolation function and port Broadcast storm suppression function.
Convenient operation
and maintenance management
Support diversified
management and maintenance methods such as web network management, CLI command
line (Console, Telnet), SNMP (V1/V2c/V3), etc.
Support encryption
methods such as HTTP/HTTPS, SSH, etc. for more secure management.
Support HTTP/TFTP for
firmware update/upgrade, support configuration file upload/download, and one
click restore of system configuration.
Support RMON, system
logs, and port traffic statistics for network optimization and transformation.
Support LLDP, making
it convenient for network management systems to query and determine the
communication status of links.
Support CPU
monitoring, memory monitoring, Ping detection, and cable detection.
Technical
specifications
Model |
P2016M-2GF |
|
Port characteristics |
||
Fixed port |
Downlink Port |
16*10/100/1000Base-T RJ45 POE ports |
Uplink Port |
2*100/1000M SFP Ports |
|
Management Port |
1*Console Port(115200,8,N,1) |
|
PoE Port |
1-16 Port Support af/at standard PoE power supply,
transmission distance 100-250 meters |
|
Network port
characteristics |
1-16ports
10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive |
|
Twisted pair transmission |
10BASE-T:Cat3,4,5
UTP(≤250 meter) 100BASE-TX:Cat5
or later UTP(≤100 meter) 1000BASE-T:Cat5e
or later UTP(≤100 meter) |
|
Optical port characteristics |
Gigabit
SFP optical fiber interface, which is not matched with Optical module by
default, needs to be purchased separately (optional order mode/multi-mode, single
fiber/dual fiber Optical module, LC/SC) |
|
Multimode : 850nm/0~550M,50μm/125μm&62.5μm/125μm Single mode: 1310nm/0~40KM,1550nm/0~120KM 。9.5μm/125μm |
||
Switching chip parameters |
||
Network
management type |
L2+
Managed |
|
Networking protocol |
IEEE802.3
10BASE-T;IEEE802.3i
10Base-T IEEE802.3u
100Base-TX IEEE802.3x
Flow Control IEEE802.3ab
1000Base-T IEEE802.3z
1000Base-X IEEE
802.3ad port trunk with LACP IEEE
802.1D Spanning Tree protocol IEEE
802.1w Rapid Spanning Tree protocol IEEE
802.1s Multiple Spanning Tree protocol IEEE
802.1p Class of service IEEE
802.1Q VLAN tagging IEEE
802.1x Port Authentication Network Control IEEE
802.1ab LLDP IEEE
802.3af DTE Power via MDI IEEE
802.3at DTE Power via MDI |
|
CPU |
500MHz |
|
DRAM |
1Gbits |
|
FLASH |
256Mbits |
|
Forwarding mode |
Store and forward (full line speed) |
|
Backplane bandwidth |
52Gbps( No blocking) |
|
Packet forwarding rate @64byte |
26.78Mpps |
|
MAC Address Table |
8K |
|
Packet forwarding cache |
4.1Mbits |
|
Jumbo frame |
10Kbytes |
|
Pilot lamp |
Power
indicator light: PWR (green); System running light: SYS (green); Network
indicator light: L/A (green), PoE indicator light: PoE (yellow); Light port
indicator light: SFP (green) |
|
One click restore switch |
1*port, Press and hold for 6 seconds and release to
Factory reset |
|
MTBF |
100000 hours |
|
POE and power supply characteristics |
||
POE Port |
1-16 ports support IEEE802.3af/at standard
POE power supply |
|
PoE Managed |
Support for PoE on/off and restart per
port, display of PoE working status per port, and real-time PoE power display |
|
Power supply pin |
Default 1/2 (+), 3/6 (-) 4-core power
supply |
|
Single port maximum PoE
power |
30W,Standard IEEE802.3af/at |
|
Total power/input voltage |
250W (AC100-240V) |
|
Overall Power Consumption |
Standby power consumption: < 15W; Full load
power consumption: < 240W |
|
Supporting power supply |
Built-in
AC switch power supply AC:100~240V
50-60Hz 4.0A |
|
Physical specification parameters |
||
Working temperature/humidity |
-20°C~+60°C;5%~90% RH No condensation |
|
Storage temperature/humidity |
-40°C~+75°C;5%~95% RH No condensation |
|
Dimension(L*W*H) |
440*190*45mm |
|
Net weight/Gross weight |
<2.5kg / <3.0kg |
|
Installation
method |
Desktop and
rack mounted |
|
Certification And Warranty |
||
Lightning protection/protection level |
Port lightning protection: 4KV 8/20us;
Protection level: IP30 |
|
Certification |
CE,FCC,RoHS,CCC |
|
Warranty period |
2 years |
|
Software Management Features |
||
Port |
Supports IEEE802.3x flow control (full
duplex), half duplex backpressure flow control Supports forced port mode and rate Support Broadcast storm and port storm
suppression Supports port traffic speed limit, with a
minimum granularity of 16Kbps and a maximum granularity of 1Gbps Support port real-time traffic management
(Flow Interval) Support Jumbo frame size control, up to 16K
packets Supports optical DDMI digital diagnostic
function |
|
IP Route |
Support L2+network management function, Support IPV4 Static routing/Default route,
with a maximum of 128 entries Supports ARP protocol with a maximum of
1024 entries |
|
VLAN |
Supports port based VLANs (4K), IEEE802.1q VLANs Support for protocol based VLANs Supports three types of port
configurations: Access, Trunk, and Hybrid |
|
Port aggregation |
Supports static aggregation and dynamic
aggregation (LACP) Supports up to 9 aggregation groups, with
each aggregation group supporting up to 8 ports |
|
Ring network function |
Support loop protection function Support STP/RSTP/MSTP Spanning Tree
Protocol Supports ERPS ring network (single ring,
multi ring, intersecting ring, and tangent ring configurations), with a
self-healing time of less than 20ms for the ring network |
|
Multicast |
Supports IGMP Snooping v1/v2/v3, up to 1024
multicast groups |
|
Image |
Supports bidirectional traffic mirroring
for basic ports |
|
QoS |
Supports
end-to-end, 802.1P, and DSCP/ToS priority, with each port supporting 8 output
queues Support four
priority scheduling modes: Equ, SP, WRR, SP+WRR Support for
priority marking Mark/Remark Supports stream
based speed limiting, packet filtering, and redirection |
|
ACL |
Support L2 to L4 packet filtering function,
can match the first 80 bytes of the message, and provide ACL definitions
based on source MAC address, destination MAC address, source IP address,
destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range,
VLAN, etc. Supports port based , VLAN issuing ACL |
|
Safety characteristics |
Support user hierarchical management and
password protection Supports port based IEEE802.1X
authentication Supports AAA&RADIUS and TACACS+
authentication Support MAC address learning limit Supports MAC address black holes and
address binding Supports SSH 2.0 and provides a secure
encrypted channel for user login Supports port isolation Support ARP message speed limit function Support IP source address protection Support ARP intrusion detection function Support anti DoS attacks Support port broadcast message suppression Support host data backup/restore mechanism Quad binding function of IP+MAC+VLAN+ ports
|
|
DHCP |
Support DHCP Serve Support DHCP Client Support DHCP Snooping v1/v2/v3 |
|
Management and Maintenance |
Support diversified management and
maintenance such as web network management, CLI command line (Console,
Telnet), SNMP (V1/V2c/V3), etc. Support web network management (support
HTTP/HTTPS) Supports HTTP and TFTP file upload/download
management Supports RMON 1, 2, 3, and 9 groups Support one button Factory reset Supports NTP clock and local clock Support for local and system logs (SYSLOG) Supports Ping detection Support cable status check Supports real-time CPU utilization status
viewing Support Link Layer Discovery Protocol LLDP Support NMS platform based cluster unified
management (LLDP+SNMP) |
|
System requirements |
Web browser: Mozilla Firefox 2.5 or higher,
Google Chrome V42 or higher Category 5 and above Ethernet cables; TCP/IP network adapters and operating
systems (such as Microsoft Windows, Linux, or Mac OS) |