Product
Overview
The P2008M-2GF series full
gigabit two-layer network managed PoE switch has 8 gigabit network ports and 2
gigabit uplink SFP optical port slots, with 1-8 ports supporting IEEE
802.3af/at standard PoE power supply, and a single port PoE power of up to 30W.
The P2008M-2GF business ports all support 4KV static lightning protection. As a
PoE power supply device, it can automatically detect and identify power
receiving devices that meet standards and provide power to them through network
cables. Power can be provided to POE terminal devices such as wireless APs,
network cameras, network telephones, and building visual access control
intercoms through network cables, meeting the demand for high-density PoE power
supply in network environments. It is suitable for hotels, campuses, parks,
supermarkets, banks, scenic spots, factory dormitories, and SMB small and
medium-sized enterprises to form an economical and efficient network.
P2008M-2GF has L2+network
management function, supports IPV4 Static routing forwarding, supports complete
security protection mechanism, perfect ACL/QoS policy and rich VLAN functions,
and is easy to manage and maintain. Supporting multiple network redundancy
protocols STP/RSTP/MSTP (<50ms) and ERPS (<20ms) ring network protocols,
improving link backup and network reliability. In the event of a one-way
network failure, communication can be quickly restored, ensuring uninterrupted
communication for important transmissions. According to practical application
needs, PoE power supply management, port flow control, VLAN partitioning, QoS,
LACP, IGMP, and DHCP are configured through network management methods such as
Web, CLI, SNMP, and Telnet.
Product characteristics
Single port PoE power
up to 30W, af/at adaptive, widely compatible with various network terminals,
supporting PoE network management, remote POE port restart, real-time power
status viewing;
Dual optical port
uplink port, fiber optic long-distance transmission, suitable for cascading and
expanding various ring/chain networks, making networking simpler;
Full gigabit
high-speed transmission, stable and guaranteed high bandwidth transmission,
supporting speed and flow control per port, achieving 10M/250 meter
long-distance transmission, easily solving long-distance communication and
power supply problems, and meeting different user needs;
Enterprise level high
bandwidth switching chip, high backplane, large cache, reducing network
congestion;
Support automatic
learning and updating of MAC addresses, and support automatic port flipping
(Auto MDI/MDI-X) function;
The business port
supports 4KV surge (lightning) protection, PoE short circuit and overload
protection, making it safer and more reliable to use;
Precision steel
forged metal shell, shielded from interference, strong heat dissipation, sturdy,
rust resistant, and more durable;
Software Features
Strong business
capabilities
It supports 128 IPV4
Static routing and ARP protocol, with a maximum of 1024 entries.
Flexible port
bandwidth and traffic configuration, optical port DDMI digital diagnosis
function, easy to achieve fine network management.
Support IEEE 802.1Q
VLAN, protocol VLAN, and QinQ VLAN, allowing users to flexibly partition VLANs
according to their needs.
Support QoS, support
three priority modes based on port, 802.1P, and DSCP, as well as four queue
scheduling algorithms: Equ, SP, WRR, and SP+WRR.
Support ACL, filter
data packets by configuring matching rules, processing operations, and time
permissions, and provide flexible security access control policies.
Support IGMP V1/V2
multicast protocol, support IGMP SnoopingV1/V2/V3, and meet the needs of multi
terminal high-definition video monitoring and video conference access.
Support STP/RSTP/MSTP
production tree protocol and ERPS fast ring network protocol, eliminate layer 2
loops, and achieve link backup.
Support static
aggregation and dynamic aggregation (LACP), effectively increase link
bandwidth, achieve load balancing, link backup, and improve link reliability.
Complete security
features
Support for WEB interface user authentication
Support CPU
protection to prevent Big data stream from attacking the switch itself
Support 802.1x
authentication, remote RADIUS, TACACS+authentication
The hardware supports
IP ACL, MAC ACL, ACL port filtering functions, MAC address binding, and port
based IP+MAC+ Vlan+ port multiple binding functions.
Support DHCP
Snoopingv1/v2/v3 function, port isolation function and port Broadcast storm
suppression function.
Convenient operation
and maintenance management
Support diversified management
and maintenance methods such as web network management, CLI command line
(Console, Telnet), SNMP (V1/V2c/V3), etc.
Support encryption
methods such as HTTP/HTTPS, SSH, etc. for more secure management.
Support HTTP/TFTP for
firmware update/upgrade, support configuration file upload/download, and one
click restore of system configuration.
Support RMON, system
logs, and port traffic statistics for network optimization and transformation.
Support LLDP, making
it convenient for network management systems to query and determine the
communication status of links.
Support CPU
monitoring, memory monitoring, Ping detection, and cable detection.
Technical specifications
|
Model |
P2008M-2GF |
|
|
Port
characteristics |
||
|
Fixed port |
Downlink Port |
8*10/100/1000Base-T
RJ45 POE ports |
|
Uplink port |
2*100/1000M SFP
ports |
|
|
1*Console port（115200，8，N,1) |
||
|
PoE Port |
1-8 ports support
af/at Standard PoE power supply, transmission distance 100-250 meters |
|
|
1-8 ports
10/100/1000M Adaptive, full/half
duplex MDI/MDI-X adaptive |
||
|
Twisted pair transmission |
10BASE-T：Cat3,4,5 UTP(≤250 meter) 100BASE-TX：Cat5 or later UTP(≤100 meter) 1000BASE-T：Cat5e or later UTP(≤100 meter) |
|
|
Optical port
characteristics |
Gigabit SFP optical fiber interface, which is not
matched with Optical module by default, needs to be purchased separately
(optional order mode/multi-mode, single fiber/dual fiber Optical module,
LC/SC) |
|
|
Optical cable |
Multimode：850nm/0～550M，50μm/125μm&62.5μm/125μm Single mode:1310nm/0～40KM，1550nm/0～120KM
.9.5μm/125μm |
|
|
Switching chip
parameters |
||
|
Network management type |
L2+ Managed Switch |
|
|
IEEE802.3 10BASE-T；IEEE802.3i 10Base-T IEEE802.3u 100Base-TX IEEE802.3x Flow Control IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree protocol IEEE 802.1w Rapid Spanning Tree protocol IEEE 802.1s Multiple Spanning Tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af DTE Power via MDI IEEE 802.3at DTE Power via MDI |
||
|
CPU |
500MHz |
|
|
DRAM |
1Gbits |
|
|
FLASH |
128Mbits |
|
|
Forwarding mode |
Store and forward
(full line speed) |
|
|
Backplane
bandwidth |
20Gbps（ No blocking） |
|
|
Packet forwarding rate @64byte |
14.88Mpps |
|
|
MAC Address Table |
8K |
|
|
Packet forwarding
cache |
4.1Mbits |
|
|
10Kbytes |
||
|
Power indicator light: PWR (green); System running
light: SYS (green); Network indicator light: L/A (green), PoE indicator
light: PoE (yellow); Light port indicator light: SFP (green) |
||
|
One click restore switch |
1*port ,Press and
hold for 6 seconds and release to Factory reset |
|
|
MTBF |
100000 hours |
|
|
POE and power supply
characteristics |
||
|
POE Port |
1-8 ports support
IEEE802.3af/at Standard POE power supply |
|
|
PoE Managed |
Support for PoE
on/off and restart per port, display of PoE working status per port, and
real-time PoE power display |
|
|
Power supply pin |
Default 1/2 (+),
3/6 (-) 4-core power supply |
|
|
30W， Standard
IEEE802.3af/at |
||
|
Total power/input
voltage |
120W （AC100-240V） |
|
|
Overall Power
Consumption |
Standby power
consumption: ＜ 8W; Full load
power consumption: ＜ 120W |
|
|
Supporting power
supply |
Built-in AC switch power supply AC：100～240V 50-60Hz 2.0A |
|
|
Physical
specification parameters |
||
|
Working
temperature/humidity |
-20°C～+60°C；5%～90% RH No condensation |
|
|
Storage
temperature/humidity |
-40°C～+75°C；5%～95% RH No condensation |
|
|
Dimension（L*W*H） |
280*180*45mm |
|
|
Net weight/Gross
weight |
＜2.1kg / ＜2.5kg |
|
|
Installation method |
Desktop and rack mounted |
|
|
Certification and
Warranty |
||
|
Lightning
protection/protection level |
Port lightning
protection: 4KV 8/20us; Protection level: IP30 |
|
|
Certification |
CE，FCC，RoHS，CCC |
|
|
Warranty period |
2 years |
|
|
Software
Management Features |
||
|
Port |
Supports
IEEE802.3x flow control (full duplex), half duplex backpressure flow control Supports forced
port mode and rate Support Broadcast
storm and port storm suppression Supports port
traffic speed limit, with a minimum granularity of 16Kbps and a maximum
granularity of 1Gbps Support port
real-time traffic management (Flow Interval) Support Jumbo
frame size control, up to 16K packets Supports optical
DDMI digital diagnostic function |
|
|
IP Routing |
Support
L2+network management function, Support IPV4
Static routing/Default route, with a maximum of 128 entries Supports ARP
protocol with a maximum of 1024 entries |
|
|
VLAN |
Supports port
based VLANs (4K), IEEE802.1q VLANs Support for
protocol based VLANs Supports three
types of port configurations: Access, Trunk, and Hybrid |
|
|
Port aggregation |
Supports static
aggregation and dynamic aggregation (LACP) Supports up to 5
aggregation groups, with each aggregation group supporting up to 8 ports |
|
|
Ring network function |
Support loop protection
function Support
STP/RSTP/MSTP Spanning Tree Protocol Supports ERPS
ring network (single ring, multi ring, intersecting ring, and tangent ring
configurations), with a self-healing time of less than 20ms for the ring
network |
|
|
Multicast |
Support IGMP
Snooping v1/v2/v3、 Supports up to 1024 multicast groups |
|
|
|
Supports
bidirectional traffic mirroring for basic ports |
|
|
QoS |
Supports
end-to-end, 802.1P, and DSCP/ToS priority, with each port supporting 8 output
queues Support four
priority scheduling modes: Equ, SP, WRR, SP+WRR Support for
priority marking Mark/Remark Supports stream
based speed limiting, packet filtering, and redirection
|
|
|
ACL |
Support L2 to L4
packet filtering function, can match the first 80 bytes of the message, and
provide ACL definitions based on source MAC address, destination MAC address,
source IP address, destination IP address, IP protocol type, TCP/UDP port,
TCP/UDP port range, VLAN, etc. Supports issuing
ACL based on port and VLAN
|
|
|
Safety characteristics |
Support user
hierarchical management and password protection Supports port
based IEEE802.1X authentication Supports
AAA&RADIUS and TACACS+authentication Support MAC
address learning limit Supports MAC
address black holes and address binding Supports SSH 2.0
and provides a secure encrypted channel for user login Supports port
isolation Support ARP
message speed limit function Support IP source
address protection Support ARP
intrusion detection function Support anti DoS
attacks Support port
broadcast message suppression Support host data
backup/restore mechanism Quad binding
function of IP+MAC+VLAN +ports |
|
|
DHCP |
Supports DHCP
Serve Supports DHCP
Client Supports DHCP
Snooping v1/v2/v3
|
|
|
Management and Maintenance |
Support
diversified management and maintenance such as web network management, CLI
command line (Console, Telnet), SNMP (V1/V2c/V3), etc. Support web network
management (support HTTP/HTTPS) Supports HTTP and
TFTP file upload/download management Supports RMON 1,
2, 3, and 9 groups Support one
button Factory reset Supports NTP clock
and local clock Support for local
and system logs (SYSLOG) Supports Ping
detection Support cable
status check Supports
real-time CPU utilization status viewing Support Link
Layer Discovery Protocol LLDP Support NMS
platform based cluster unified management (LLDP+SNMP)
|
|
|
System
requirements |
Web browser:
Mozilla Firefox 2.5 or higher, Google Chrome V42 or higher Category 5 and
above Ethernet cables; TCP/IP network
adapters and operating systems (such as Microsoft Windows, Linux, or Mac OS) |
|
