Two-channel physical isolation USB3.0 optical terminal is to multiplexed two independent USB3.0 signals on a core optical fiber through the wavelength division multiplexing technology, and the one-to-one data transmission does not affect each other. It can extend the high-speed signal transmission distance of up to 5Gbps USB3.0 SuperSpeed to 250 meters. Supports USB 3.0 industrial cameras, high-speed cameras, VR, mobile hard drives, USB flash drives and other devices. The products can be used in Kinect motion sensing peripherals, industrial video transmission, machine vision system, high-definition video monitoring system, high-speed data acquisition system, optical fiber seat system, remote storage, digital signage and TV wall, industrial printer system and other fields.
Product features:
1, not compatible with USB2.0 and USB1.1, only support USB3.0 devices;
2. Support all self-powered USB3.0 devices and provide working power for USB3.0 devices;
3, multi-mode or single-fiber fiber transmission, the maximum transmission distance of optical fiber 250 meters;
4, two USB ports one-to-one transmission does not affect each other, single port provides the maximum 500mA current;
5, anti radio frequency interference, electromagnetic interference, suitable for sensitive electromagnetic environment application;
6, built-in ESD electrostatic protection circuit, support with electric plug;
7, rich LED indicator light, to indicate the key parameters;
8, no need to install any driver, compatible with any system, no need to set, plug and play;
9, full surface mounting technology, industrial design, high reliability, the average trouble-free time ≥ 100,000 hours.
Specification parameters:
Fiber optic part |
Optical fiber interface |
FC interface |
Fiber wavelength |
Single mode single fiber1510/1530/1550/1570nm wavelength |
|
Optical fiber transmission distance |
Single mode 250M |
|
USB Interface section |
receiver（Type A） |
2 USB 3.0 data cables connected to the host USB 3.0 interface |
transmitter（Type A） |
2 USB 3.0 devices connected single port ,maximum current 500mA |
|
USB data cable transmission distance |
maximum 2M（Pure copper wire diameter） |
|
Power supply section |
Applicable voltage range |
DC 5V-12V |
Transmitter power consumption |
<10W（External power adapter） |
|
Receiver power consumption |
<5W（Computer USB3.0 port power supply） |
|
Environmental Indicators |
operation temperature |
-20℃-70℃ |
storage temperature |
-40℃-85℃ |
|
Working humidity |
0-95% (No condensation） |
|
mechanical properties |
Size (length × width × height) |
170*167*45mm |
material quality |
Aluminium alloy |
|
color |
black |
Power on operation sequence：
1, the host terminal optical terminal machine (receiver R) is inserted into the USB3.0 interface of the computer, the computer power supply;
2. The optical terminal of the device (transmitter T) is connected to the 5V power supply and the optical fiber;
3. Connect the USB3.0 device to the optical terminal (transmitter T) at the device end.
Note: If the USB indicator is steady on, the device is properly connected and working properly. Otherwise, reconnect the device.
