JRGT-E8016U-P is an EPON uplink POE ONU designed specifically for security, with 16 gigabit ports and POE power supply function. This ONU can provide users with direct access to IP data. It is based on mature, stable, and cost-effective EPON technology, providing a PON interface and 16 10/100M adaptive electrical interfaces. Single fiber Wavelength-division multiplexing technology (downlink 1490nm, uplink 1310nm) is adopted, only one fiber is needed to connect with OLT, the maximum transmission distance can reach 20km, and power failure reporting function is supported. The 16 POE ports have the function of automatically detecting and identifying PD devices that comply with the IEEE 802 af/at standard and providing power to them, so there is no need to worry about damaging private standard PoE or non PoE devices. It is an ideal choice for small commercial networks that use PoE economically to deploy wireless access points (APs) and IP based Network monitoring cameras. It can effectively solve the problems of cumbersome maintenance, wireless coverage, terminal equipment power supply, and long security monitoring projects, minimizing project costs.
Product characteristics:
1. Complies with IEEE802.3ah-2005 and CTC EPON equipment technical requirements
2. Supports up and down symmetric 1Gbit/s rates
3. Supports 1 LLID, supports bidirectional FEC, and supports FEC encoding and decoding of RS (255239)
4. Supports downstream triple agitation and AES128 decryption function
5. Supports synchronous Ethernet function and bandwidth allocation for SBA and DBA
6. Support Dying Gasp detection and reporting
7. Support mainstream ONU detection
8. Two way line speed forwarding of Layer 2 data services, and 1K MAC address tables are supported in Bridge pattern
9. Supports Tag/Untag Ethernet frames for 802.3 and 802.1Q, supports QinQ
10. Supports flexible tag processing, compatible with CTC2.1 and TR156 requirements
11. Support energy-saving in accordance with the CTC 2.1 standard
12. Supports L2, L3 (IPv4/6) multicast forwarding, supporting multiple forwarding methods, including: DMAC, DMAC+VLAN, DIP, IP+SIP, DIP+VLAN, DIP+SIP+VLAN, DIP+SIP+VLAN
13. Support QOS function
14. Using single fiber Wavelength-division multiplexing technology (downlink 1490nm, uplink 1310nm), only one fiber is needed to connect with OLT, and the transmission distance can reach 40km
15. Easy to install and maintain, supporting multiple local/remote management configurations and software upgrades. In conjunction with office OLT, remote fault diagnosis and positioning functions can be achieved, greatly reducing maintenance workload
16. The 100M electric interface supports power supply through wireless access points (APs) and Network monitoring cameras of five types of Ethernet cables
17. POE power supply port supports IEEE802.3af/at standard PD devices
18. Ultra long distance data transmission and power supply, up to 100 meters away, saves power lines, and can flexibly install wireless AP and Network monitoring equipment projects
19. Adopting a storage and forwarding exchange mechanism
20. Intelligent power supply, minimum power consumption, ensuring PD end power demand
21. With power circuit protection function, it can protect the safety of backend devices
22. Zero configuration characteristic power supply is automatically supplied to adaptive devices
23. Fan free silent design, energy-saving and environmentally friendly
24. The machine adopts a hanging ear design, which allows for flexible placement of switches and walls
25. Support loop detection
26. Supports port unlinked power saving function
Technical parameters:
PRODUCT MODEL |
JRGT-E8016U-P |
||
power supply |
input voltage |
AC100-240V 50-60Hz |
|
Power consumption |
The machine itself consumes less than 15W Total power consumption is less than 250W |
||
Port parameter |
Network port |
1~16 Downlink network port:10/100Mbps 1 Uplink PON port: 1.25Gbps/SC |
|
Transmission distance |
1~16 Downlink POE network port:100 m When CCTV turned on supports downlink 250 meters Uplink network port:less than 100 m Uplink optical port:0-120 KM optional |
||
Transmission medium |
1~16 Downlink network port:Cat5e/6 standard UTP network cable, Uplink optical port:Optical fiber/SFP |
||
POE standard |
Comply with IEEE 802.3af/at international standard, single port maximum power supply 30W |
||
PoE Power supply mode |
End straddle bonding method |
||
PoE Power supply power |
Single POE port ≤30W,whole machine<250W |
||
Exchange parameters |
Network standards |
IEEE802.3i,IEEE802.3u,IEEE802.3ab,IEEE802.3z,IEEE802.3x,IEEE802.3az,IEEE802.1Q(VLAN), IEEE 802.1w(RSTP)、 IEEE 802.3af/at |
|
backplane bandwidth |
7.2Gbps |
||
Forwarding method |
store and forward |
||
Forwarding rate |
10Mbps:14880pps, 100Mbps:148800pps |
||
Packet data cache |
5.4M |
||
MAC address table |
4K |
||
status indicator |
Power indicator light |
1 indicating power supply (green) |
|
Fiber optic indicator light |
GF Port Green Light |
||
Ultra long distance transmission indicator light |
1 indicator CCTV(green) |
||
POE Power supply portLED |
PoE status indicator 16 RJ45 yellow lights |
||
Network data port LED |
16 RJ45 green lights for data status indication |
||
Switch |
Dial switch |
Default Defaults on CCTV mode,1-16 port isolation and speed reduction to 10M, data and power transmission distance of 250 meters in Vlan mode, downstream port isolation |
|
protection grade |
Lightning protection for communication ports |
4KV Executive standards:IEC61000-4-5 |
|
environmental specification |
operation temperature |
-20℃~70℃ |
|
storage temperature |
-40℃~80℃ |
||
Humidity (non condensing) |
5~95% |
||
Physical specifications |
Size (length × wide × High) |
330 x 205 x 44.5mm |
|
colour |
black |
||
weight |
1.7kg |
||
reliability |
Mean time between failures |
>50000h |