Product overview
The
core switch family is available in a variety of models.Provides high-capacity switching capability, perfect security control
policy and CPU protect policy to improve fault tolerance, ensure stable network
operation and link load balancing, the device supports automatic DoS attack
defense and SNMP, IEEE 802.1,Spanning tree and fast spanning tree protocol,
link aggregation, etc.It has the features of high bandwidth, low latency, and
easy network management. It is positioned for high-density access in data
centers and cloud computing networks, and can also be used in the core of
medium and large Internet cafes, enterprise networks, and metropolitan area
networks.
Product characteristics
1. Excellent
performance
760G backplane bandwidth
The packet forwarding rate reached 565.44Mpps. Procedure
Ethernet/IEEE802.3 Packet Size (64
bytes to 1522 bytes)
Jumbo packets up to 9216 bytes
2. Safe and
reliable
Provides protection against DOS, distributed denial of
service, spoofing, and viruses
Supports IEEE802.1x and provides port-based user
authentication, security control technology, and policy control list
The maximum number of hosts connected to a port is
limited. Ethernet ports are bound in multiple ways to increase bandwidth and
system redundancy
Policy control list and traffic regulation
3. Easy to use and maintain
It can be managed through various methods, such as Web
and SNMP
Supports the XModem protocol and can upgrade software and BootRom through
TFTP/ZMODEM
4. Powerful traffic
and broadcast management
It can automatically detect and suppress broadcast storms
and supports the detection of IGMP packets, effectively limiting the overflow
of broadcast packets
Supports flow control in full duplex mode and half duplex
mode
The speed limit of an Ethernet interface is 1 Mbit/s
Product parameter
Basic characteristics |
||||||||
|
32 gigabits of light |
24 gigabit light |
16 gigabit light |
16 ports 10 Gigabit power |
24 ports 10 Gigabit electricity |
32 gigabits of electricity |
32 10 gigabit optical ports |
Eight 40G optical ports |
Fixed port |
28 10G SFP+ optical ports Four 25G SFP28 optical ports 1 console One OOB management port |
20 10G SFP+ optical ports Four 25G SFP28 optical ports Two 40G QSFP optical ports 1 console One OOB management port |
16 10G SFP+ optical ports Four 40G QSFP optical ports 1 console One OOB management port |
16 10G RJ45 electrical ports Four 40G QSFP optical ports 1 console One OOB management port |
24 10GRJ45 electrical ports Two 40G QSFP optical ports 1 console One OOB management port |
32 10G RJ45 electrical ports 1 console One OOB management port |
16 10G RJ45 electrical ports 12 10G SFP+ optical ports Four 25G SFP28 optical ports 1 console One OOB management port |
Eight 40G QSFP optical ports 1 console One OOB management port |
Backplane
bandwidth |
760Gbps |
|||||||
Packet forwarding rate |
565.44 Mpps |
|||||||
Flash capacity |
32MB |
|||||||
Memory capacity |
256M |
|||||||
MAC address table |
32768 |
Software function |
||
Layer 2 management function |
Port
setting |
Port auto-negotiation |
Flow control |
||
Port mirroring |
||
Traffic statistics |
||
Link
aggregation |
Static link aggregation |
|
Load balancing |
||
Link backup |
||
Source/destination
MAC based algorithm |
||
Source/destination
IP address-based algorithm |
||
Dynamic link aggregation |
||
MAC |
Aging time setting |
|
Dynamic
MAC address management |
||
MAC
address binding and filtering |
||
Static
MAC address |
||
VLAN |
802.1q
Tag VLAN |
|
VLAN
based on MAC address |
||
VLAN based
on protocol |
||
Spanning
tree |
802.1d
Spanning Tree Protocol (STP) |
|
802.1w
Fast Spanning Tree Protocol (RSTP) |
||
802.1s
Multiple Spanning Tree Protocol (MSTP) |
||
ERPS |
Ethernet ring protection |
|
LLDP |
Link
layer discovery protocol |
|
Multicast
management |
IGMP v1/v2/v3 |
|
IGMP
Snooping |
||
Fast
Leave |
||
IGMP
statistics |
||
Three
layer management functions |
Static
route |
for
IPV4/6 |
RIP |
Ripv1/2 |
|
RIPng |
Rip for
ipv6 |
|
OSPF |
OSPF
v1/2 for ipv4 |
|
OSPF6 |
OSPFv3
for ipv6 |
|
ISIS |
ISIS |
|
BGP |
BGP+ |
|
PIM |
SM/SSM |
|
VRRP |
V1/2
for ipv4 |
|
V3 for
ipv6 |
||
Service
quality |
4/8
Priority Queue (base chip) |
|
Port-based
COS |
||
COS
based on 802.1p |
||
COS
based on DSCP |
||
Priority
rule: SP, WRR, SP+WRR |
||
Storm
control (broadcast, multicast, unicast unknown) |
||
Port -
and traffic-based inlet/outlet rate limits |
||
Safety
function |
Port security |
|
Port isolation |
||
Loopback detection |
||
Access control list |
||
Manage session timeout |
||
Web-based
GUI access restrictions based on IP |
||
Management
function |
SNMP
v1/v2c/v3 |
|
Public
MIBs |
||
SSH
server |
||
Web-GUI
(http/https) |
||
Telnet |
||
Upgrade
the firmware WEB page |
||
Configuration saving and uploading |
||
DHCP
server |
||
ONVIF
discovery |
||
NTP
Client |
||
IPv6 support
features |
Dual IPv4/IPv6
stack |
|
Multicast Listener
Discovery Protocol (MLD) |
||
IPv6 Neighbor
Discovery (ND) |
||
Discover the path
MTU |
||
Internet Control
Message Protocol (ICMP) version 6 |
||
TCPv6/UDPv6 |
||
Ping6 |
||
Tracert6 |
||
Telnet (v6) |
||
Http/Https |
||
Static route |
||
IPv6 TFTP |
||
Maintenance
function |
CPU monitor |
|
Memory monitor |
||
System log |
||
Ping test |
||
Tracert
test |
||
Physical
characteristics |
||
dimension |
440x400x44mm |
|
Power source |
Ac 100-240V adaptive, 47-63Hz, support dual AC power
supply (optional before delivery) |
|
power |
<100W |
|
Pilot lamp |
Power supply indication, system indication |